CLEANBOOSTER NG
> ACTIVE DEGREASING AGENT
Powerful surfactants loosen any oils and greases from the parts that need to be degreased.
A heating element raises the temperature which increases the degreasing activity.
Allows the degreasing of steel and its alloys, which are usually reactive, without leaving any white marks due to salt or corrosion.
Interchangeable brushes provide mechanical action. The brushes are supplied with a permanent flow of degreasing solution.
During the whole cleaning process, the solution flows through the CLEAN FILTER and is recycled. A pump recovers the solution at the bottom of the tank, the purified solution flows to the part to be cleaned, then back through the CLEAN FILTER.
- Specially inhibited, does not leave white marks
- Excellent degreasing properties
- Very good emulsifying power
- Loosens and eliminates adhering particles
- Contains anticorrosive agents
- Does not attack ferrous or non ferrous metals and composite materials
- Contains no soda or caustic products
- Non-flammable solution
- No hygiene and safety labelling required
- Is an advantageous replacement for solvents
- Is a good way to reduce consumption of solvents, production of waste, and V.O.C. emissions
- Cleaning solution for biological degreasing equipment
- Suitable for manually degreasing parts soiled by oils, greases or hydrocarbons
- The degreased surfaces remain dry after wiping on all types of supports, ferrous or non-ferrous metals and composites.
- TURBOMECA : CCT LB 540
- DGA (French Army) : Fiche identification n° 3721
- Put the CLEAN BOOSTER NG bag-in-box packaging on the retention platform.
- Remove the siphon.
- Cut the cardboard along the dotted lines and take out the nozzle.
- Put the bag-in-box on the side of the sink. Remove the cap and pour into the sink. Adjust the level of liquid to 80 litres, which corresponds to 4 bag-in-box.
- We advise using CLEANODOR as a precaution, once every 6 months.
- Dosage: 5 litres of CLEANODOR for 80 litres of CLEAN BOOSTER NG.
- Composition : aqueous solution of surfactants, nutrients, anti corrosive agents
- Density : 1.0
- pH : 7.8
- Colour : translucent






