D-SOLV
> Oil Based Wax Dissolver
D-Solv is a blend of hydrotreated oils and surfactants formulated as part of a free solvent multi-step wax removal process.
- Part of an environmentally friendly process.
- Does not contain carcinogenic ingredients.
- Can absorb 40% of its weight in wax.
- Has an extensive operational life.
- Is easily rinsed in light alkaline cleaners.
- Stable at elevated temperatures.
- Does not contain chlorine, phenols, or hexavalent chrome.
-
Technical Data Sheet
- PRATT & WHITNEY : SPMC-182
- ROLLS ROYCE : oMat 1/288B
- GE : CO4-265
- CFM : CP-2649
- IAE : CoMat 01-507
- TURBOMECA : CCT LB 531
- SNECMA : DMP 13-107
- NATO : NSN 6850C022357
Dewaxing process
1) Immerse components in hot wax to dissolve thick accumulations and leave a thin uniform residual film.
2) Immerse components in MagChem D-Solv, used neat, heated to 88-93°C (190-200°F) or approximately 15°C (27°F) above the melting point of the wax.
3) This step is a repeat of # 2 and is optional. It is either an accelerator of the process or a safeguard against line shut-down.
4) Rinse by immersion in water maintained at 49-54°C (120-130°F).
5) Components are immersed in a 10% solution of Soluwax, heated to 50-80°C (122-176°F).
6) Immerse in water maintained at 54-60°C (130-140°F).
7) Immerse components in a 3-4% solution of Corrotek, heated to 71-77°C (160-170°F), during 2-5 minutes, to absorb heat. Upon removal, parts will flash-dry. Ferrous surfaces will be protected during further in-shop processes.
- Appearance : colourless liquid
- Flash point (open cup) : 190°C (350°F)
- Specific gravity : 0.85