< Back to Search
(187 Results)
DG-KLEEN
> Aqueous Degreaser
DG-Kleen is a blend of surfactants and penetrants used as a pre-cleaner or as an actual cleaner in spray-wash cabinets. It can replace traditional chlorinated vapour degreasing.
- Multi-metal safe.
- Non-foaming at temperatures above 40°C (104°F).
- Used in spray cabinets.
- Free of solvents.
- Surfactants are biodegradable.
- Good hard water control.
- Non-flammable.
- Does not contain terpenes, cresols, or chrome derivatives.
- Free of phosphates and nitrites.
- Meets the requirements of ARP-1755, group 10.
- PRATT & WHITNEY : SPMC 113
- ROLLS ROYCE : oMat 1/24P
- GE : CO4-184
- CFM : CP-2565
- HONEYWELL : C04-184 (AS900- engines)
- AIR CANADA : 99904A1259
- IAE : CoMat 01-468
- TURBOMECA : CCT LB 540
- NATO : NSN#.7930AD0000024
CONCENTRATION
Washine machine
- As a pre-cleaner, use at a concentration of 2-4%.
- As a degreaser/cleaner, use at a concentration of 5-10%.
TEMPERATURE AND CYCLE
- Maintain at a temperature of 68-74°C (155-165°F).
- Contact time is 5-30 minutes, in accordance with the tenacity of the soils.
NOTES
- The above operations can advantageously replace vapour degreasing processes that use chlorinated solvents.A final rinse in Corrotek will prevent in-process flash corrosion.
- Oil and grease contaminants will be expelled to the surface of the solution. The floating accumulation should be skimmed off at regular intervals.
- The above operations should be followed by a thorough water-rinse, either by hydro-air spray-gun, by immersion in a continuous over-flow tank or by both.
- Appearance : Yellowish liquid, pleasant odour
- pH : (at 100%) 13
- Flash point : none
- Specific gravity : 1.1
Complementary Products
RUST PREVENTIVE COMPOUND
Corrotek is a liquid in-process rust preventive for use on steel parts. It provides rust protection and normally does not have to be removed prior to assembly of the protected parts.Corrotek is a clear...
Oil Based Wax Dissolver
D-SOLV SW is a chemical specialty formulated as part of a solvent-free multi-step wax removal process where the final degreasing step is operated by spray and excellent de-emulsifying properties are required.Part...






