< Back to Search
(187 Results)
DIESTONE M-TK
> SPRAY-ON / WIPE-OFF DEGREASING SOLVENT
Diestone M-TK is a solvent blend intended for use by spray or immersion, to remove oil, grease, and protective films from bare or painted surfaces.
- Safe on all metal
- Non-chlorinated
- Fast acting, will not affect painted or plastic coated metal surfaces
- Stable blend
- Does not contain ketones or aromatic solvents
- Does not cause weld porosity
- Not photo-chemically reactive
Documents to download :
-
Technical Data Sheet
Diestone M-TK is a colorless solvent blend. It is a low viscosity fluid meant to be used as a wipeon/wipe-off, or spray-on/wipe-off degreasing solvent.
- PRATT & WHITNEY : SPMC-156
- ROLLS ROYCE : oMat 1/257K
- GE : C04-197
- CFM : CP-2566
- AIR CANADA : 99904A1277
- HONEYWELL : C04-197 (AS900 engines)
- IAE : CoMat 01-491
- Diestone M-TK is intended to be used as is. It can be applied by hand spray or brushed on.
- Diestone M-TK can also be used by immersion. Parts are immersed in a holding tank. The immersion cycle depends on the nature and quantity of soils to be removed.
- Appearance : colourless liquid
- Specific gravity : 0.77 at 15°C (60°F)
- Viscosity : 1.6 - 1.7cp at 25°C (78°F)
- Flash point : ASTM D-93 : 64°C (147°F)
- Fire point : 65°C (149°F)
- Freeze-thaw stability : stable
- Dielectric constant : 50kV
- Vapour pressure : at 20°C (68°F) : 0.9 mmHg
- KB value : 48
- Stability : stable
- Effect on soils : dissolution
Complementary Products
PRESATURATED WIPES
Available with re-usable center-pull canister which eases use in workshops and increases wipe efficiency.Meets the requirements of AMS 3819B and BMS 15-5FLarge range of presaturation solutions such as...
MULTI-PURPOSE CLEANING SOLVENT
DIESTONE DLS is a solvent composition with controlled volatility and weak odour. It is free from chlorinated hydrocarbons and used as a cleaning agent. The product provides maximum security : it does not...