HYSO 96/3
> INTER-TREATMENT SAFE CLEANING SOLVENT QUICK EVAPORATION
HYSO 96/3 is a solvent compound with a high flash point and controlled volatility, free from chlorinated or aromatic solvents, ethylene glycols and fluorinated compounds.
- HYSO 96/3 dries faster than the usual non chlorinated solvents. Compared to solvents having the same flammability classification (60°C), the evaporation time is halved.
- Quickly dissolves agglomerated greases and other soils such as neat or soluble cutting oils, greasy, oily or wax-like temporary protective products and paraffins.
- It can be easily used by spraying or by dipping with low evaporation losses and the slight odour has proved acceptable to users. Dielectric solvent for the cleaning without attack on electronic equipment (plastics, sheaths, etc.).
- Since the loss by evaporation is moderate, the solvent consumption is reduced to that needed for the degreasing work.
-
Technical Data Sheet
- Aluminium, titanium and steel sheet transformation, plastic material transformation, for all degreasing of painted or not painted metallic or plastic parts without risk of damage.
- Substitute for harmful solvents used for the degreasing and preparation of surfaces before painting, and the cleaning of electrical and electronic equipment.
- Cleaning of joint and mastic application materials.
- TURBOMECA : CCT LB 540
- SAFRAN : PR1500
- DGA (French Army) : Fiche d'identification n° 3723
- BOEING : D6-17487P Solvents cleaners; General Cleaning
Use HYSO 96/3 pure, at ambient temperature:
- by dipping with or without ultrasonics,
- by spraying,
- by brushing,
- or in a washing machine with solvent recycling.
The average contact time with pieces to be treated varies from 3 to 5 minutes. The drying of pieces may be accelerated with compressed air blowing.
By dipping, it is advised to provide an outlet at the bottom of the tank (with either a sloping or a conical bottom) in order to regularly remove residues and water coming from the pieces.
- Appearance : clear liquid
- Odour : low, pleasant
- Flammability point : (ISO 2592) 63°C
- Action on materials : totally inert on steels, aluminium and alloys, titanium, galvanized steel, plastic materials (PVC, polyester...), painted surfaces (glycerophthalic, acrylic, polyurethane...)
- Density : (at 20°C) 0.81
- Evaporation rate (NFT 30301) : 0.16
- Disruptive voltage : 45 KV/cm (ASTM D 877-87)