Find a product

 

Products found :
See products
0

Market segment :

SOCOCLEAN A3431

> ALKALINE DEGREASER IN IMMERSION

Concentrated degreaser descaler developed for treatment of aluminium and its alloys in hot immersion. Removes greases, dry agglomerated soils and hydraulic oils. Perfectly adapted for degreasing before deoxidation, treatment before conversion and preparation prior to bonding.

 

  • SOCOCLEAN A3431 is formulated to quickly clean very dirty aluminium mechanical parts
  • SOCOCLEAN A3431 is intended for  cleaning various metals such as steel, nickel, copper, plastic materials and composites.
  • SOCOCLEAN A3431 is free from borate, chromate and silicate. It provides a satin finish cleaning on aluminium and its alloys.
Technical Data Sheet
  • SAFRAN : Pr-1500

DEGREASING   

  • Concentration:    3 to 10 %
  • Temperature:    40 to 45°C
  • Time:    5 minutes to ½ hour according to the degree of dirt accumulation

In case of excessive foam production we advise to use the anti foaming additive ADISSOL.

If you need to reinforce the degreasing properties of the bath, you can add SOCOCLEAN DB at 0.1 to 1% v/v.

  • Appearance : clear liquid
  • Specific gravity : (at 20°C) 1.1
  • pH : (at 5%) 10
  • Corrosion rate on 2024 : 0.1 mg/cm².h (temperature 40°C, concentration 10%)
  • Flammability : nulle
  • Biodegradability : conform to legislation
  • Free of : soda, potash, EDTA, NTA , hydrocarbons

Complementary Products

ANTI FOAMING SURFACTANT ADDITIVE FOR AQUEOUS DEGREASING
Biodegradable compound with controlled foaming properties designed to optimise the efficiency as well...

Should you need any further information on this product
please see our North American website : www.socomore-na.com

Should you need any further information on this product
please see our North American website : www.socomore-na.com