SOCOSOLV 96

> SAFER INTER-TREATMENT CLEANING SOLVENT WITH FASTER EVAPORATION

SOCOSOLV 96 is a solvent compound with high flash point and controlled volatility. It is free of chlorinated or benzene solvents, ethylene glycols and fluorinated compounds.

Compared to other non chlorinated solvents, SOCOSOLV 96 has an accelerated drying speed.
Many solvents with the same flash point (60°C) evaporate at half the rate of SOCOSOLV 96.
Dissolves agglomerated greases and soils such as gums, cutting oils, oily, greasy, or wax-like temporary protective coatings and paraffins.
Easy to use by spraying or by dipping with low losses by evaporation. Slight odour for better comfort of the operators. Dielectric solvent for soft cleaning of plastic, cable sleeves, electronical equipment.
Air safety and saving: as losses by evaporation are moderate, only the necessary quantity of solvent is needed for degreasing.

Documents to download :

Technical Data Sheet

Engineering industries (aeronautics, automobile, railways) dockyards, transformation of steel and aluminium sheets, transformation of plastic material, for any degreasing of metallic or plastic parts whether painted or not with no risk of alteration.
Substitute for harmful solvents such as trichloroethylene, toluene for any preparation operation, to degrease the surfaces before welding or painting, cleaning of electric or electronical equipment.

SNCF (French Railways) : Symbols: 8.210.0089, 8.210.0091, 8.210.0094 (liquid form) / 0.210.0132 (PROSAT wipes) / 0.210.0138 (SATWIPES) / 0.210.0133 (SCRUBSAT wipes)

Use SOCOSOLV 96 pure, at an ambient temperature:
- by immersion, with or without ultrasonics
- by spraying,
- by brushing
- in a washing machine with a cycling process
- by cleaning rag (wipes)
3 to 5 minutes is the average contact time necessary. The drying of the parts can be accelerated with a compressed air jet.
By immersion, it is recommended to set up an effluent disposal at the bottom of the tank (it can be either a sloping or a conical bottom) in order to dispose of the residual waste and any water coming from the parts.

Appearance : clear liquid
Odour : slight, pleasant
Flammability point : (ISO 2592) 63°C
Action on materials : non corrosive on steels, aluminium and its alloys titanium alloys, galvanized steel, plastic materials (PVC, polyester, etc...), painted surfaces (glycerophthalic, acrylic, polyurethane...)
Specific gravity : (à 20°C) 0.77
Evaporation rate (NFT 30301) : 0.16
Disruptive voltage : 40 KV/cm (ASTM D 877-87)