< Back to Search
(187 Results)
SOCOSTRIP A0102N
> THICKENED PAINT STRIPPER FOR INTERCOAT PAINT SYSTEMS
Paint remover especially suited to the more easily strippable paints used on aircraft known as "intermediate coats". Non-corrosive on metallic surfaces (steels, aluminium and magnesium alloys, titanium, etc.).
- SOCOSTRIP A0102N reduces the safety and environmental risks and drawbacks usually linked to removers containing dichloromethane, phenols and chromates or acids.
- The viscosity is adjusted in order to facilitate the application by hand or by means of "airless" apparatus and to effectively cover all surfaces, even if vertical or overhanging.
Documents to download :
-
Technical Data Sheet
- AIRBUS : CML 12-013 B
- AIRBUS France : IPDA 4241
- AIRBUS Group : AIPI 05.03.005
- BOEING : Boeing D6-17487P (conform)
- ATR : MAT 12-011
- SOCOSTRIP A0102N can be manually applied by brushing or by spraying under low pressure (airless). This remover is not compatible with acids; it is not to be used near those products.
- The surfaces to be treated must be clean and dry. It is important to eliminate all soils and greases from the painted surfaces before removal; use suitable cleaners either aqueous or solvent such as SYNCLAIR or DIESTONE.
- The action of the product begins immediately, but the penetration speed depends on the paint type and on the number of layers to be removed. The removal time varies from 5 minutes to several hours.
- If the paint is still adhering 6 or 12 hours after application, remove the product from the substrate by means of non-rigid scrapers and re-apply.
- After paint removal, rinse by water spraying. In the case of aerospace paints containing an "intermediate coat" (with polyamide for example), the upper coat and the intermediate coat are removed, while the primer in direct contact with the substrate remains intact.
- Temperature is an important factor. If the temperature is low, the product will act very slowly. The optimum temperature for use is between 22 and 25° C (71.60 and 77° F).
- Appearance : thixotropic gel
- Density : (at 20°C) 1.0
- Flammability : (ISO 2592) 85°C
- Application temperature : minimum advised: 20 to 25° C (68/77°F)
Complementary Products
WATER-SOLUBLE CONCENTRATED CLEANER FOR ALL METALS SUITABLE FOR USE IN BATH OR HIGH PRESSURE CLEANER
Cleaner formulated for fast cleaning of air vehicles, fuselage, landing gear, wheel bays.
MULTI-PURPOSE CLEANING SOLVENT
DIESTONE DLS is a solvent composition with controlled volatility and weak odour. It is free from chlorinated hydrocarbons and used as a cleaning agent. The product provides maximum security : it does not...