< Back to Search
(187 Results)
SYNCLAIR A2 GEL
> THIXOTROPIC BIODEGRADABLE CLEANING AGENT
Cleaner designed for fast cleaning of air vehicles, fuselage, landing gear, wheels bays.
SYNCLAIR A2 GEL is a high performance cleaning compound.
SYNCLAIR A2 GEL affords various exceptional and particularly interesting properties:
- SAFETY
SYNCLAIR A2 GEL is easy to handle without risk for the users. It is absolutely free of phosphates, petroleum solvents and colouring agents. - SAVING
Because of its presentation in gel, the consumption is strictly limited to the volume needed for covering the surface to be cleaned, even if this surface is vertical or overhanging. - QUALITY
SYNCLAIR A2 GEL has been tested for its safety on all kinds of painted and unpainted materials: steel, aluminium and alloys (2024, 7075), zinc, titanium, composite materials, glasses, polycarbonates. It causes no embrittlement on high strength steel. - EASY TO USE
The application is easy with conventional spraying equipment (Airless is recommended). The product is visible on surfaces, drying is significantly retarded, it does not leave marks and can be very easily rinsed with cold or hot water. - POWER
SYNCLAIR A2 GEL offers high performance; it is suitable for dissolution of heated and hardened greases and oils, of the most adherent soils and "washable" temporary protectives (e.g. PROPACO) by a single application ; it therefore replaces solvent-base products often used in such cases.
- EADS / EUROCOPTER : IF. MA n°548
- DASSAULT AVIATION :
- AIR FRANCE :
- DGA (French Army) : Fiche identification n°3503 - Attestation Aptitude Aéronautique n° 017
- AIR CANADA : 99904A1521, 99904A1522
- BOEING : BOEING D6-17487 (conform)
- SAE : AMS 1523A & AMS 1535C (conform)
Adjust the spraying in order to avoid incorporation of air. The gel is visible, let react 15 minutes, then rinse with a jet of water. In case of very thick soils, agitation before rinsing can be useful; rinse with hot water if possible.
- Appearance : clear colourless gel
- Odour : low
- Specific gravity : (at 20°C/68°F) 1.0
- pH : (at 1%) 10.2
- Flammability : (ISO 2719) nil
- Biodegradability : conform to legislation
Complementary Products
«WASHABLE» CORROSION-PREVENTIVE AND SCRATCHPROOF PROTECTION CAMOUFLAGE PRODUCT
A temporary protection compound quickly drying and forming an adhesive film particularly resistant to scratches, bad weather, saline or corrosive atmospheres, acid vapours, water, grease, oil and hydrocarbon...
WATER-BASED COATING
A quick drying temporary protection compound that forms an adhesive film which is particularly resistant to scratches, bad weather, saline or corrosive atmospheres, acid vapours, water, grease, oil and...






