fr en
Find a product

 

Products found :
See products
0
Clear search

Market segment :

WADIS 11B

> WATER DISPLACING AND LUBRICATING CORROSION PREVENTIVE PROTECTION

WADIS 11B is a water displacing and corrosion preventive agent with a high flash point usable cold for the protection of manufactured parts in the aerospace industry.

WADIS 11B is not subject to any EC classification regarding VOCs (Directive 199/13CE).

  • Safe to use on all metals, steels, aluminium and alloys, zinc, as well as composites and plastics.
  • WADIS 11B displaces water from substrates and provides them with a protective film. The treated surfaces are hydrophobic and isolated from humidity and corrosive vapours.    
  • The product can be used by dipping. Low losses by product drag out combined with controlled volatility which reduces evaporation, give important savings.
  • The flash point is stable in time and remains constant throughout the evaporation period.
  • The product is delivered after filtration at 5µ to avoid damaging complex equipments.
Documents to download :

  • Technical Data Sheet

    fr en

  • Unseizing, water displacing and lubrication of ram guides, mechanical assemblies, electric or mechanical engine parts, foundry moulds and fastenings.
  • Quick degreasing of mechanical parts soiled by oil, sludges and greases.
  • TURBOMECA : CCT 00706, CCT 00540
  • Can be used by dipping or by spraying. By dipping, provide a draining system at the bottom of the tank to collect wastes, various residues and water released from treated parts.
  • The recommended contact time is approximately 5 minutes.
  • The drying of parts can be accelerated by compressed air blowing.
  • Appearance : clear yellow liquid
  • Density : 0.8
  • Flash point : 87°C