CLEANER SOCOCLEAN EXTERIOR AIRCRAFT CLEANERS 210 L

Sold by: 210 L drum

SOCOCLEAN EXTERIOR AIRCRAFT CLEANER is a cleaner for aircraft exterior surfaces.

It is 100% plant-based actives (100% of the ingredients are derived from renewable resources), free of petroleum derivatives or chemical additives which offers an ultimate biodegradability on 100% of the formula. It is intended for the cleaning of aircraft exteriors (fuselage, landing gear…) and is usable on following surfaces/materials:

• Metallic painted and unpainted surfaces
• All metals, glasses and paints, composites, plastic materials, acrylic plastics. May be used on all surfaces without risk of attack or corrosion.

Key benefits:

• 100% plant-based
• Ultimate biodegradability of 100 % of the formula
• Zero VOC (Volatile Organic Compounds).
• Zero hazard identification in terms of toxicity and ecotoxicity.
• No health hazard - no Personal Protective Equipment needed.
• No fire hazard associated with its use – non-flammable product.
• No transportation constraints.

USES

The SOCOCLEAN EXTERIOR AIRCRAFT CLEANER is an ideal ready-to-use solution on pre-saturated wipes. It is an effective alkaline multi-purpose cleaner and degreaser.

APPLICATION

SOCOCLEAN EXTERIOR AIRCRAFT CLEANER is ideally used on presaturated wipes.

The system of pre-saturated wipes provides economical, environmental and safety advantages for users compared others methods. It helps to:

• Standardize cleaning and preparation operations,
• Improve quality and production line performance,
• Lower the quantity of product used,
• Reduce waste: for the same surface, the volume of wipes used is 5 to 10 times less than the volume of traditional cloths,
• Pre-saturated wipes are easy to use, handle and store compared to cloths and cleaning solution

Otherwise the liquid product should be used as supplied without dilution at ambient temperature:

• Dilute the product from 10% (w/w) with clean water, up to 100% (depending on soiling level)
• Spray the product directly on the surface or pour onto a microfiber mop, and then apply to the surface
• Let stand for 1 minute (Do not let dry)
• Dry wiping with a clean/dry soft microfiber
• Do not let the product dry without wiping

• AIRBUS
• AMS1526
• BOEING
• SAE