Description of B101C
MANUFACTURER : BabbCO (Fr)
Fluorescent magnetic detecting medium:
- very fine
- very stable
- spray canned
May be used in any MPI (Magnetic Particle Inspection) technique: current flow, electromagnets, permanent magnets, etc…
Precautions
Transport / Handling :Refer to Material Safety Data Sheet (MSDS). Storage : Keep away from moistureTemperature range : -5°C à 50° C (23°F to 122°F).Keep packaging closed after taking out some of the product
Directions for use
It is better to remove any paint residue, oxide, welding powder, which could give false indications.Part degreasing is suggested.Shake B 101C can until ball inside is clearly heard.For 3 to 5 seconds spray B 101C while magnetizing the part.Let magnetizing on for 2 or 3 seconds after spraying ends so as to “glue” the particles. Inspect using a UV-A source giving at least 1500 µW/m² on the surface under inspection, in a darkened area (visible light level less than 20 lux), after a 2 to 3 minutes adaptation period for the operator”s eyes (refer to ISO 3059)
Your password has been sent to you by email.