Description of B103C
MANUFACTURER : Babb Co (Fr)
Black magnetic detecting medium for detection of surface and subsurface defects on ferromagnetic parts:
- High sensitivity
- Very thin powder
- Shipped in spray cans
Can be used with any magnetic testing equipment (including electric current generators, electro-magnets, permanent magnets).
Companion products : White background B 104A, Solvent B 105
Transport / Handling :Refer to Material Safety Data Sheet (MSDS).Storage : Keep away from moistureTemperature range : 0°C à 50° C (32°F to 122°F).Keep packaging closed after taking out some of the product
Directions for use
It is recommended to remove any paint, oxide, welding flux, etc. from the part to be examined, as such traces are likely to produce false indications, and to degrease the part carefully.Prior application of the B 104A contrasting white background is strongly recommended. The contrast with B 103C shall then be enhanced significantly, causing reading to be easier and detection to be safer.Once the B 104A is dry, shake the B 103C can vigorously until the ball tinkles clearly.Then, spray the B 103C on the area to be examined during magnetization. Let magnetization on for 1 to 2 seconds after the spray stops, in order for the particles to come into place properly.Inspection should be done under an ordinary white light with a sufficient level (350 lux minimum recommended or 500 lux, depending on applicable specifications).