BabbCoSafe 778B

WATER-BASED FLUORESCENT MAGNETIC INK

BabbCoSafe 778B

WATER-BASED FLUORESCENT MAGNETIC INK

Description of BabbCoSafe 778B

MANUFACTURER: Babb Co (F)

babbco controle non destructif cnd

Fluorescent magnetic detecting medium available in spraycan and concentrate to be diluted in water at 5.0 % by volume (1:20).

  • Very fine and stable product containing anticorrosion, wetting and dispersing additives.
  • Non-flammable propellant
  • Very low odor
  • Very low sulfur and halogens contents
  • Temporary frost resistance, down to -10 °C (concentrate form)

This product can be used with any magnetic field generator (current passing, hand yokes, permanent magnets) and in magnetic bench.

Companion products: Tap water, demineralized water or unconditioned demineralized water (SED grade for Electricity of France)

Directions for use

BabbCoSafe 778B can be used from 0 to 50 °C but the best results are achieved between 10 and 35 °C. Preparation :We advise to clear the piece from any paint, oxide, soldering flows, etc., likely to give false indications, and to degrease carefully and thoroughly.- For the concentrate dilution :Shake thoroughly the product before pour it in a suitable container. Rinse the packaging twice with water and then adjust the final volume according the following data.Packaging of concentrate : X LVolume of « ready to use » : 20 * X LShake again in order to disperse all the particles. In machine let the pump run for at least 30 minutes before use. The product is then ready for use.- For the spraycan :The product is ready to use, shake the can until you can clearly hear the ball tinkling.Application :Spray BabbCoSafe 778B during 3 to 5 seconds on the area to be inspected during the magnetization. Continue magnetisation for 2 to 3 seconds after you stop spraying.Observation :Inspection is done under UV-A light (minimum irradiance: 1000 μW/cm², recommended irradiance:  1500 μW/cm²) with low residual visible light (< 20 lux) and after adaptation of the eye for 2 to 3 minutes according EN ISO 3059 standard.The use of actinic blue (A-Blue®) is possible.

!

Access the product technical and safety data sheets here, and download them in one click.

BabbCoSafe 778B
Technical sheetPDF / Download
Available / Ask for a quote