BabbCoSafe 850A

WATER-BASED DUAL PURPOSE RED MAGNETIC INK

BabbCoSafe 850A

WATER-BASED DUAL PURPOSE RED MAGNETIC INK

Description of BabbCoSafe 850A

MANUFACTURER: BABBCO (F)

babbco controle non destructif cnd

Dual purpose magnetic ink for inspection under UV-A and/or white light, actinic blue is possible:

  • very thin
  • very stable

Can be used with any magnetic field generator (current passing, hand yokes or permanent magnets).

Precautions

Transport / Handling: See Safety Data Sheet (SDS)Storage:Keep away from moisture.Temperature range: 0 to 50 °C.Keep packaging closed after taking out some of the product.

Directions for use

We advise to clear the piece from any paint, oxide, soldering flows, etc., likely to give false indications, and to degrease carefully and thoroughly.Best results are obtained by using SAFE 850A between 10 and 35°C.Shake the can until you can clearly hear the ball tinkling.Spray SAFE 850A during 3 to 5 seconds on the area to be inspected during the magnetization. Carry on magnetization for 2 to 3 seconds after you stop spraying, so that the particles can take their place properly.Inspection is done under white light (red indications) and/or UV-A light (red-orange fluorescent indications). ISO 3059 standard is applicable. A “cold” white light (white-blue) is better.The use of actinic blue is possible and gives excellent results.

!

Access the product technical and safety data sheets here, and download them in one click.

BabbCoSafe 850A
Technical sheetPDF / Download
Available / Ask for a quote