K5500

OIL BASE FOR MAGNETIC TESTING

K5500

OIL BASE FOR MAGNETIC TESTING

Description of K5500

MANUFACTURER: BABBCO (FR)

K5500 originates from a special petroleum fraction, and is particularly well suited to serve as an organic medium for micronized iron oxide particles used for magnetic testing. Its low viscosity, the lack of own fluorescence, the lack of aromatic solvents, make it safe to use.

Companion product(s): Every powder that has to be dispersed

Precautions

Transport / Handling : refer to MSDS (material safety data sheet)Storage : temperature: 0 to + 50°C Keep away from light and moisture, in a reasonably ventilated room.Keep the packaging closed after taking out some of the product.

Directions for use

Black magnetic powder :Dilute 5 to 9 grams of BP 42 powder for 1 liter of K 5500.Shake for approximately 1 minute in order to homogenize.Also shake for approximately 1 minute before taking product from the canister and, during use, shake the product in service from time to time to put the powder back in suspension.Fluorescent magnetic powder:Dilute 0.5 to 1.3 gram of MG 800 or MG 118 or SY 8000 powder for 1 liter of K 5500.Then, shake as above.Caution: fluorescent magnetic powder in dispersion will inevitably degrade, even if unused.The resulting product can be used within the 30 months following its dispersion in the K 5500.Other fluorescent powders may have a much more limited shelflife (sometimes less than 2 months).

!

Access the product technical and safety data sheets here, and download them in one click.

K5500
Technical sheetPDF / Download
Safety Data SheetPDF / Access the secure area
Available / Ask for a quote