Description of SY8000
MANUFACTURER: MARKTEC (J)
Green magnetic powder designed for use in a solvent or water-based media.
Used for revealingdefects in magnetic testing.
Companion products: organic media K5500 or K9300.
Transport / Handling: refer to MSDS (material safety data sheet)Storage : temperature range: 0 to + 50°CKeep away from moisture.Keep packaging closed after taking out some of the product
Directions for use
Use:Refer to the technical data sheets of the corresponding carrier liquids for operating temperatures.Preparation:Dispersing the powder gradually in a suitable organic carrier liquid (K5500, K9300 or K9300P) and shaking vigorously. The product can be used within 30 months.Shake the product vigorously before sampling or use.Concentrations can vary from 0.2 to 3.5 g/L depending on the application. For the detection of defects in the bottom of the thread on bolts, prefer a concentration between 0.2 and 0.5 g/L.Application:Spray the product on the part to be tested during magnetization. Continue magnetization for 2 to 3 seconds after the end of application.Observation:Observe under UV-A illumination (minimum irradiance: 1000 µW/cm² recommended: >1500 µW/cm²) in dimmed visible light (< 20 lux) after adaptation of the eye for 2 to 3 minutes according to EN ISO 3059. Actinic blue (A-Blue®) possible.