WADIS 24 displaces water and humidity giving to the treated surfaces a water-repellency by adding a thin translucent, soft film with good anti-corrosive properties. Free from boron, silicone, barium. Its dielectric features are excellent. It can be used without any hazard on all switch gears and control gears, including high tension. WADIS 24 is also a releasing and lubricating agent.
WADIS 24 possesses a great affinity for metallic surfaces, superior to those of water. Owing to an extremely weak surface tension combined with a very strong capillary attraction, it acts by very quickly substituting itself for water, penetrating and infiltrating into the slightest porosities and fissures and form a monomolecular tight, insulating and protective film.
WADIS 24 does not attack paints, plastic and rubbers.
The translucent, soft, thin film of the product allows inspection of parts without requiring its previous removal.
The successive applications of WADIS 24 do not accumulate. A new application makes the old film dissolve, forming a new film.
Compatible with mineral oils, the protected pieces can come directly into contact with other lubricants and with hydraulic fluids.
As it is a lubricant itself, it can be used for shallow forming without any other protection.
It is unnecessary to remove WADIS 24 from pieces before a machining operation. A rapid mixture will be effected between product and cutting oil without any risk of dirtying.
WADIS 24 is compatible with long-lasting protectives such as SOCOPAC. When it is necessary to displace the water from the substrate (areas subjected to condensation) and in the same time to assure a long-lasting protection, WADIS 24 should be used first in order to displace water and then SOCOPAC 50 should be applied to ensure protection of several years duration.